Electrolux E36WC45FSS Manual de usuario descargar pdf (Pagina 17)

Installation

Non-Ducted Hoods Only

1 Remove the tape on the electrical system plate; place the electrical system plate

on the hood (use a protection). Figure 12

2 Discard discharge collar/damper supplied with the hood. Install the 5” to 6” adapter

supplied with the Non-Ducted Recirculation Kit.

3 Secure the plenum to the ﬂue mounting bracket with (2) 3.9x6mm ﬂat head

screws (the screws are supplied with the Non-Ducted Recirculation Kit Model

DFKTWC40EC). Figure 13.

ELECTRICAL

SYSTEM

PLATE

PROTECTION

3.9x6mm

FLAT HEAD

SCREWS

PLENUM

FLUE MOUNTING

BRACKET

5”-6”

ADAPTER

Figure 12

Figure 13

NOTE

The following materials must be purchased separately for non-ducted recirculation

installations.

• Non-Ducted Recirculation Kit Model DFKTWC40EC.

• 5” diameter duct.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Electrolux E36WC45FSS Manual de usuario Pagina 17