Electrolux E36WC45FSS Manual de usuario descargar pdf (Pagina 20)

Installation

INSTALL THE FILTERS

Ducted and Non-Ducted Hoods

1 To remove the GREASE ﬁlter, push in on the metal latch tab and tilt ﬁlter downward

to remove.

2 To install the GREASE ﬁlter, align rear ﬁlter tabs with slots in the hood. Depress

the metal latch tab, push ﬁlter into position and release. Make sure ﬁlter is securely

engaged after installation.

Non-Ducted Hoods Only

1 To remove the CHARCOAL ﬁlter, push in on the front ﬁlter latch. Pull the ﬁlter down

to disengage the rear ﬁlter tabs.

2 To install the CHARCOAL ﬁlter, align the rear ﬁlter tabs with slots in the hood. Push

the ﬁlter up into place until the front latch snaps securely into the slot. Make sure

the ﬁlter is securely engaged after assembly.

3 Install GREASE ﬁlter after charcoal ﬁlter is installed.

GREASE

TABS

LATCH

NON-DUCTED

RECIRCULATION

FILTER

Figure 18

Figure 19

NOTE

Prior to use, remove protective ﬁlm from the ﬁlter frame.

1 2 ... 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Electrolux E36WC45FSS Manual de usuario Pagina 20