Electrolux ESL63010 Manual de usuario descargar pdf (Pagina 16)

The cleaning results are not satisfactory

Dry water drop signs on

glasses and dishes

• Increase rinse aid dosage.

• The detergent can be the cause.

TECHNICAL DATA

Dimensions Width cm 59,6

Height cm 81,8-87,8

Depth cm 55,5

Electrical connection - Voltage -

Overall power - Fuse

Information on the electrical connection is given on the rating

plate on the inner edge of the dishwasher door.

Water supply pressure Minimum 0,5 bar (0,05 MPa)

Maximum 8 bar (0,8 MPa)

Capacity Place settings 12

INSTALLATION

Warning! Make sure that mains plug is

disconnected from the mains socket

during installation.

Important! Obey the instructions in the

enclosed template to:

• Build-in the appliance.

• Install the furniture panel.

• Connect to the water supply and drain.

Install the appliance under a counter (kitch-

en worktop or sink).

If a repair is necessary, the appliance must

be easily accessible for the engineer.

Put the appliance adjacent to a water tap

and a drain.

For the venting of the dishwasher only wa-

ter fill, water drain and power supply cable

openings are necessary.

The dishwasher has adjustable feet to allow

the adjustment of the height.

Make sure that the water inlet hose, the

drain hose and the supply cable are not

kinked or squashed, when you insert the

machine.

Attaching the appliance to the adjacent

units

Make sure that the counter below which

you attach the appliance is a safe structure

(adjacent kitchen units, cabinets, wall).

Adjusting the level of the appliance

Make sure that the appliance is level to

close and seal the door correctly. If the level

of the appliance is correct, the door does

not catch on the sides of the cabinet. If the

door does not close correctly, loosen or

tighten the adjustable feet until the appli-

ance is level.

WATER CONNECTION

Water inlet hose

Connected the appliance to a cold water

supply.

Connect the inlet hose to a water tap with

an external thread of 3/4”.

Caution! Do not use connection hoses

from an old appliance.

The water pressure must be in the limits (re-

fer to the chapter 'Technical data'). Make

sure that the local water authority gives you

the average mains pressure in your area.

Make sure that there are no kinks in the

water inlet hose and that the water inlet

hose is not squashed or entangled.

Turn the inlet hose to the left or the right to

suit the installation. Fit the locknut correctly

to prevent water leaks.

16 electrolux

1 2 ... 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios