Electrolux EN3881AOX Manual de usuario descargar pdf (Pagina 19)

1

2

3

4

5

The wires in the mains lead are

coloured in accordance with the

following code:

1.

1

Green and Yellow: Earth

2.

3

Brown: Live

3.

5

Blue: Neutral

As the colours of the wires in the mains

lead of this appliance may not correspond

with the coloured markings identifying the

terminals in your plug, proceed as follows:

1.

Connect the wire coloured green and

yellow to the terminal marked either

with the letter “E“ or by the earth

symbol

or coloured green and yel-

low.

2.

Connect the wire coloured blue to the

terminal either marked with the letter

“N“ or coloured black.

3.

Connect the wire coloured brown to

the terminal either marked with the

“L“ or coloured red.

4.

Check that no cut, or stray strands of

wire is present and the cord clamp

4

is secure over the outer sheath.

5.

Make sure the electricity supply volt-

age is the same as that indicated on

the appliance rating plate.

6.

Switch on the appliance.

The appliance is supplied with a 13 amp

plug fitted

2

. In the event of having to

change the fuse in the plug supplied, a 13

amp ASTA approved (BS 1362) fuse must

be used.

WARNING!

A cut off plug inserted into a 13

amp socket is a serious safety

(shock) hazard. Ensure that it is

disposed of safely.

8.7 Door reversibility

WARNING!

Before carrying out any opera-

tions, remove the plug from the

power socket.

WARNING!

Make sure that the appliance is

electrically not powered.

To carry out the following opera-

tions, we suggest that this be

done with another person who will

keep a firm hold on the doors of

the appliance during the opera-

tions.

• Remove the upper hinge cover with a

screwdriver (4).

• Open the door and remove the door

end cap cover (1) .

• Remove the top front covers on both

sides. (2,6).

• Unplug the cable connector of the dis-

play (3).

ENGLISH 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios