Electrolux ERC3709 Manual de usuario descargar pdf (Pagina 12)

Electrolux 818 21 42-01/1

Door Reversal

1. Close t he appliance and disconnect the appliance

from the electricity socket.

2. Remove the ventilation grille. There is a part on

the grille that can be removed. Reposition it and

transfer to the opposite side.

3. Support the appliance on a wooden block when it

is laid down. This will make it easier to grip under

the appliance when returning to an upright position.

4. On the upper part of the appliance. Remove the

hinge pin and replace on the other side.

5. On the lower part of the appliance.

a Unscrew the hinge.

b Remove the door-closing fittings from the hinge

and put the hinge pin on the other side. Then attach

the supplied door-closing fitting.

6. a. Remove the door-closing fitting from the

bottom of the door.

b. Remove the plastic plug from the corresponding

hole on the other side. Use a screwdriver to rock the

plug loose. Then secure the supplied door-closing

fitting.

c. Secure the lower hinge.

7. Raise the appliance and replace the ventilation

grille.

8. To transfer the handle.

Unscrew the screws. Fit the handle onto the opposite

side by turning it one half circle. Press the supplied

plastic plugs into the holes to which the handle was

previously fitted.

9. P ut the appliance in position. Check that it stands

straight. See the section "Positioning the appliance".

1 2 ... 7 8 9 10 11 12 13

Sin comentarios

Electrolux ERC3709 Manual de usuario Pagina 12