Electrolux EGT6247NOW Manual de usuario descargar pdf (Pagina 9)

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• There is a risk of fire when the

appliance is in connection with an

extension cable, an adapter or a

multiple connection. Make sure that

the ground connection agrees with the

standards and regulations.

• Do not let the power cable to heat up

to a temperature higher than 90° C.

Make sure that you connect

the blue neutral cable to the

terminal with a letter "N" on

it. Connect the brown (or

black) phase cable to the

terminal which has a letter

"L". Keep the phase cable

connected at all times.

3.5 Connection cable

To replace the connection cable use only

the special cable or its equivalent. The

cable type is: H05V2V2-FT90.

Make sure that the cable section is

applicable to the voltage and the working

temperature. The yellow / green earth

wire must be approximately 2 cm longer

than the brown (or black) phase wire.

3.6 Assembly

1.

2.

min.

55 mm

min.

650 mm

560 mm

480 mm

min.

100 mm

30 mm

3.

4.

B

A

5.

CAUTION!

Install the appliance only on

a worktop with flat surface.

3.7 Possibilities for insertion

The panel installed below the hob must

be easy to remove and let an easy

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Comentarios a estos manuales

Sin comentarios