
electrolux 33
To adapt the appliance to a different
kind of gas from the one the appliance
has been set for, follow the instructions
below in their order.
Hob burners nozzles
1. Nozzles replacement1. Nozzles replacement
1. Nozzles replacement1. Nozzles replacement
1. Nozzles replacement
1) Remove the pan supports.
2) Extract the caps and the wall baffles
of the burners.
3) Using a socket spanner 7 unscrew
and remove (Fig. 3) the nozzles
replacing them with the ones
required for the kind of gas in use
(see table “Burner characteristics”).
Reassemble the parts following the
same procedure backwards.
These burners do not need any
primary air regulation.
2. Adjustment of minimum level2. Adjustment of minimum level
2. Adjustment of minimum level2. Adjustment of minimum level
2. Adjustment of minimum level
To adjust the minimum level:
1) turn the knob to the position of
minimum flame;
2) remove the knob (Fig. 4);
3a) when converting from natural gas
to LPG, tightly screw the by-pass
screw of the cocks;
3b) when converting from LPG to na-
tural gas unscrew about one-fourth
turn by-pass screw, until a regular
small flame is reached.
Reassemble the parts following the
same procedure backwards.
Check that, turning quickly the knob
from the maximum position to the
minimum one, the flame does not go
out.
Adaptation to different kinds of gas
Fig. 4
Fig. 3
by-pass screw
Comentarios a estos manuales