Electrolux EW36IC60IS Guía de uso y cuidado descargar pdf (Pagina 15)

OPERATING THE COOKING ZONES (CONT’D)

IMPORTANTOPERATINGNOTES:

• Fluids spilled or objects lying on the controls area of the cooktop may cause the cooktop to

display an error code and turn OFF while cooking. Clean the spills or remove the objects

from the cooktop.

• Be sure the cooktop vent openings are NOT blocked. If the vent openings are blocked, the

cooktop internal sensor may shut OFF the cooktop to avoid overheating the appliance.

• If the cookware or pan is moved from the center of any active Cooking Zone for any reason,

a sensor will detect the situation and the cookware will no longer heat. The affected Cooking

Zone display will rotate the LEDs surrounding the digital display indicating a pan is not

detected. The Cooking Zone will remember the power level setting for up to 3 minutes before

the Cooking Zone will automatically shut OFF.

SettingSurfaceControls

LED MESSAGES OR LIGHT INDICATORS DISPLAYED

BY COOKING ZONE CONTROLS

POWER LEVEL SETTINGS - The Cooking Zones have separate Power Level displays.

Once active, the Cooking Zones will provide 26 Power Levels to choose from. These include

(Fig. 1), 2, 3, 4, 5, 6, 7, 8, 9 and HI; as well as precise .2 increment Cooking Zone Power

Levels between and 3 (Fig. 2); and half-increment power levels between 3 and 9.5 (Fig.

3). The highest setting of “PowerBoost” (Fig. 4) provides up to 139% power for 10 minutes

or 14 minutes for specic cooking zones (see page 17).

RESIDUAL HEAT - Once any Cooking Zone has been used and the cooktop surface

temperature on any of the Cooking Zones is still HOT, hotsurface (See Fig. 5) will appear

in the display for the affected Cooking Zone. The hotsurfacewill continue to display even if

the Cooking Zone has been turned OFF as long as the temperature is still too HOT.

KEEPWARM - Use the WARM key pad to activate the Warm setting for any of the Cooking

Zones. The ON/OFF key pad for the desired Cooking Zone must be activated rst, then

touch the Cooking Zone WARM key pad area once to set. w (warm) should appear in the

corresponding Cooking Zone display (See Fig. 6). You can also press the "-" pad until w

appears.

PANDETECTION - All Cooking Zones will provide a Pan Detection message. If a Cooking

Zone is turned ON and no pan is detected, or the pan has been moved or is not centered

correctly, or is not made of magnetic material, the affected Cooking Zone display will rotate

the LEDs surrounding the digital display and the Cooking Zone will not heat. The LEDs will

continue to rotate until either a pan is detected or until the zone is turned off either by pressing

the ON/OFF key pad or 3 minutes after the no pan detection has commenced.

Fig. 1

Fig. 4

Fig. 2

Fig. 5

Fig. 3

Fig. 6

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Sin comentarios

Electrolux EW36IC60IS Guía de uso y cuidado Pagina 15