Electrolux F43GXE Manual de usuario descargar pdf (Pagina 9)

5.4 Display

A B C

A. Function indicators

B. Time display

C. Function indicator

5.5 Buttons

Button Function Description

MINUS To set the time.

CLOCK To set a clock function.

PLUS To set the time.

5.6 Ignition of oven gas burner

When you use the oven for

the first time, several lighting

attempts are normally

required due to the presence

of air in the gas pipe.

WARNING!

The oven cannot be lit with a

naked flame.

1. Turn the knob for the oven functions

to .

The oven light comes on.

2. Turn the knob for the temperature to

select the temperature.

The temperature lamp / indicator comes

on.

The oven starts the lightning phase after

about 5 seconds.

The ignition cycle is 12 - 16

seconds of sparking. It is

performed maximum four

times.

In case of ignition failure, after 40 - 45

seconds of stand-by, the Gas block

warning indicator comes on and the flow

of gas is stopped. To try lighting again,

turn the knob for the oven functions and

the knob for the temperature to the Off

position, wait for one minute then repeat

the operations described above.

In case of a power failure

during the gas oven

operation, the oven

deactivates and the gas flow

is stopped. When the power

is restored, reset the clock

functions before you use the

appliance again.

The flame is visible through

the front holes of the bottom

of the oven. When the

temperature indicator is off,

also the burner is off.

When you switch off the

oven during the operation

and you turn in on

immediately, it is normal to

have a maximum 60

seconds of stand-by before

the ignition starts.

5.7 Grilling

1. To activate only the electric grill, turn

the knob for the oven functions to

and set the maximum temperature.

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Comentarios a estos manuales

Sin comentarios