Electrolux EHG90932X Manual de usuario descargar pdf (Pagina 7)

1 2

3

4

5

1 Green and Yellow

2 3 amp fuse

3 Brown

4 Cord clamp

5 Blue

Should the plug need to be replaced for

any reason, the wires in the mains lead are

coloured in accordance with the following

code:

Green and Yellow - Earth

Blue - Neutral

Brown - Live

1. Connect the green and yellow (earth)

wire to the terminal in the plug which is

marked with the letter 'E' or the earth

symbol

or coloured green and yel-

low.

2. Connect the blue (neutral) wire to the

terminal in the plug which is marked

with the letter 'N' or coloured black.

3. Connect the brown (live) wire to the ter-

minal in the plug which is marked with

the letter 'L' or coloured red.

Upon completion there must be no cut, or

stray strands of wire present and the cord

clamp must be secure over the outer

sheath.

Important! A cut off plug inserted into a 13

amp socket is a serious safety (shock)

hazard. Ensure that the cut off plug is

disposed of safely.

Important! The replacement of electric

cable must be carried out exclusively by the

service force centre or by personnel with

similar competencies, in accordance with

the current regulations.

Replacement of the connection cable

To replace the connection cable use only

H05V2V2-F T90 or equivalent type. Make

sure that the cable section is applicable to

the voltage and the working temperature.

The yellow/green earth wire must be ap-

proximately 2 cm longer than the brown (or

black) phase wire.

Building In

min. 55 mm

min. 650 mm

830 mm

480 mm

min. 450 mm

30 mm

10 mm

27 mm

27 mm

A

A - supplied seal

electrolux 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comentarios a estos manuales

Sin comentarios