Electrolux EHS8671P85C Manual de usuario descargar pdf (Pagina 14)

Timer

There are two ways to use the timer:

– as a safety cut-out function. Set a cooking period

for a cooking zone, and after this time has elapsed

the cooking zone will automatically switch itself off.

This function can be used for more than one cook-

ing zone simultaneously.

– as a countdown timer without a cut-out function

(“egg timer”), whereby an acoustic signal can be

heard after the set period of time has elapsed.

3 The countdown timer cannot be used if a

cooking zone is switched on.

Safety cut-out

The cooking zone(s) for which you want to use the

safety cut-out function must be switched on.

1. Using the timer sensor panel T, select the cooking

zone for which the safety cut-out is to be set.

By touching the timer sensor panel T once the first

active cooking zone is selected in a clockwise direc-

tion, and the corresponding control lamp will flash

rapidly. Hereby the (e.g.) left rear control lamp corre-

sponds to the left rear cooking zone. 00 will appear

in the timer display.

The next active cooking zone is selected by touching

the timer sensor panel again T.

2. While the control lamp is flashing rapidly, use the +

or - timersetting sensor panels to set the desired

period of time for this cooking zone up until the

point where it automatically switches itself off (e.g.

15 minutes).

The safety cut-out function will be activated after

several minutes

The control lamp will now flash more slowly and the

remaining cooking time will be shown in the display

as it elapses. If the safety cut-out function has been

set for more than one cooking zone, the time dis-

played will be that for the cooking zone with the

shortest period of cooking time remaining. The con-

trol lamps for the other cooking zones for which the

safety cut-out function has been set will illuminate.

To display the remaining cooking time for any of

these cooking zones, it must be selected using the

timer sensor panel T, and the corresponding control

lamp will then flash rapidly.

To reset the remaining cooking time the desired

cooking zone must be selected using the timer sen-

sor panel T. The corresponding control lamp will

then flash more rapidly. The settings are reset using

the + or - timer setting sensor panels.

After the set period of cooking time has elapsed the

cooking zone automatically switches itself off, an

acoustic signal sounds for two minutes and the timer

display flashes 00.

3. To switch off the signal, touch the timer sensor

panel T.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 75 76

Comentarios a estos manuales

Sin comentarios

Electrolux EHS8671P85C Manual de usuario Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Electrolux EHS8671P85C