Electrolux EKG613A1OX Manual de usuario descargar pdf (Pagina 23)

WARNING!

When installation is complete,

make sure that the seal of

each pipe fitting does not

leak. To check the seal use a

soap solution, not a flame.

The gas supply ramp is on the rear side of

the control panel.

WARNING!

Before you connect the gas,

disconnect the appliance

from the electricity supply or

switch off the fuse in the fuse

box. Close the primary valve

of the gas supply.

14.9 Adjustment to different

types of gas

WARNING!

Let only an authorized person

do the adjustment to different

types of gas.

If the appliance is set for

liquid gas you can change it

to natural gas, with the

correct injectors.

The gas rate is adjusted to

suit.

WARNING!

Before you replace the

injectors, make sure that the

gas knobs are in the Off

position. Disconnect the

appliance from the electrical

supply. Let the appliance cool

down. There is a risk of injury.

The appliance is set to default

gas. To change the setting

choose a pipe holder from

the list. Always use the

gasket sealing.

A CB

A) Gas connection end

B) Natural Gas pipe holder

C) LPG pipe holder

14.10 Hob injectors replacement

Replace the injectors when you change

the gas type.

1. Remove the pan supports.

2. Remove the caps and crowns of the

burner.

3. Remove the injectors with a socket

spanner 7.

4. Replace injectors with the ones

necessary for the type of gas you use.

5. Replace the rating plate (it is near the

gas supply pipe) with the one for the

new type of gas supply.

You can find this plate in

the bag supplied with the

appliance.

If the supply gas pressure is not constant

or it is different from the necessary

pressure, install an applicable pressure

adjuster on the gas supply pipe.

ENGLISH

23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios