Electrolux EKI6751AOX Manual de usuario descargar pdf (Pagina 32)

To support the self-cleaning procedure,

heat the empty oven on a regular basis.

1. Clean the oven floor with warm water

and washing up liquid, then dry it.

2. Set the function.

3. Set the oven temperature to 250 °C

and let the oven operate for 1 hour.

4. When the appliance is cool, clean it

with a soft and moist sponge.

11.4 Removing the shelf

supports

To clean the oven, remove the shelf

supports.

1. Pull the front of the shelf support

away from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove

it.

2

1

The retaining pins on the

telescopic runners must

point to the front.

Install the shelf supports in the opposite

sequence.

CAUTION!

Make sure that the longer

fixing wire is in the front. The

ends of the two wires must

point to the rear. Incorrect

installation can cause

damage to the enamel.

11.5 Replacing the lamp

Put a cloth on the bottom of the interior

of the appliance. It prevents damage to

the lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The back lamp

The lamp glass cover is at

the back of the cavity.

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the oven lamp with a

suitable 300 °C heat-resistant oven

lamp.

Use the same oven lamp type.

4. Install the glass cover.

The side lamp

Find the lamp glass cover at the left side

of the cavity.

1. Remove the left shelf support to get

access to the lamp.

2. Use a narrow, blunt object (e.g. a

teaspoon) to remove the glass cover.

www.electrolux.com32

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Comentarios a estos manuales

Sin comentarios