Electrolux EKK60331X Manual de usuario descargar pdf (Pagina 19)

electrolux 19

Cleaning the oven

Before any maintenance or

cleaning can be carried out, you

must DISCONNECT the appliance

from the electricity supply.

The oven should be kept clean at

all times. A build-up of fats or other

foodstuffs could result in a fire,

especially in the grill pan.

This appliance cannot be cleaned

with steam or with a steam

cleaning machine.

Cleaning materials

Before using any cleaning materials on

your oven, check that they are suitable and

that their use is recommended by the

manufacturer.

Cleaners that contain bleach should NOT

be used as they may dull the surface finishes.

Harsh abrasives should also be avoided.

• Never use steam or steam machines to

clean the appliance.

External cleaning

Regularly wipe over the control panel,

oven door and door seal using a soft cloth

well wrung out in warm water to which a little

washing up liquid has been added.

To prevent damaging or weakening

the door glass panels avoid the use of

the following:

• Household detergent and

bleaches

• Impregnated pads unsuitable for

non-stick saucepans

• Brillo/Ajax pads or steel wool

pads

• Chemical oven pads or aerosols

• Rust removers

• Bath/Sink stain removers.

Clean the outer and inner door glass

using warm soapy water. Should the inner

door glass become heavily soiled it is

recommended that a cleaning product such

as Hob Brite, or Bar Keepers Friend is used.

Oven lamp replacement

Disconnect the appliance from the

electricity supply.

If the oven bulb needs replacing, it must

comply with the following specifications:

electric power, 15 W/25 W; electric rate, 230

V (50 Hz); resistant to temperatures of

300°C; connection type: E14. These bulbs

are available from your local Service Force

Centre.

To replace the faulty bulb (Fig. 8):

1. Ensure the oven is disconnected from

the electrical supply.

2. Turn the glass cover anticlockwise.

3. Remove the faulty bulb and replace it

with the new one.

4. Refit the glass cover.

5. Reconnect to the electrical supply.

)

Fig. 8

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 63 64

Comentarios a estos manuales

Sin comentarios