Electrolux EKK6130AOW Manual de usuario descargar pdf (Pagina 29)

12.10 Adjustment to different

types of gas

Let only an authorized person

do the adjustment to different

types of gas.

If the appliance is set for

natural gas you can change it

to liquid gas, with the correct

injectors.

The gas rate is adjusted to

suit.

WARNING!

Before you replace the

injectors, make sure that the

gas knobs are in the Off

position. Disconnect the

appliance from the electrical

supply. Let the appliance cool

down. There is a risk of injury.

The appliance is set to default

gas. To change the setting

always use the gasket

sealing.

A B C

DE

A) Gas connection point (only one point

is applicable for the appliance)

B) Gasket

C) Adjustable connection

D) Natural Gas pipe holder

E) LPG pipe holder

12.11 Hob injectors replacement

Replace the injectors when you change

the gas type.

1. Remove the pan supports.

2. Remove the caps and crowns of the

burner.

3. Remove the injectors with a socket

spanner 7.

4. Replace injectors with the ones

necessary for the type of gas you use.

5. To change to gas G110, G120 or

G2.350, attach the air regulator onto

the main jets. Screw it on as tight as

possible.

6. Replace the rating plate (it is near the

gas supply pipe) with the one for the

new type of gas supply.

You can find this plate in

the bag supplied with the

appliance.

If the supply gas pressure is not constant

or it is different from the necessary

pressure, install an applicable pressure

adjuster on the gas supply pipe.

ENGLISH

29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Comentarios a estos manuales

Sin comentarios