Electrolux ETIH3022EMB Manual de usuario descargar pdf (Pagina 19)

ENG

ENG

35 electrolux installation

installation electrolux 36

Electrical connection

Before connecting, check that the

nominal voltage of the appliance, that

is the voltage stated on the rating

plate, corresponds to the available

supply voltage. Also check the power

rating of the appliance and ensure that

the wire is suitably sized in accordance

with local wiring rules to suit the

appliance power rating. The rating

plate is located on the lower casing of

the hob. Means for disconnection

must be incorporated in the xed wiring

in accordance with local wiring

rules.The hob is to be connected to the

mains using a device that allows the

appliance to be disconnected from the

mains at all poles with a contact

opening width of at least 3 mm, eg.

automatic line protecting cut-out, earth

leakage trips or fuse.

The connection must be carried out as

shown in the diagram.

The earth lead is connected to terminal

The earth lead must be longer than

leads carrying electric current. The

cable connections must be made in

accordance with regulations and the

terminal screws tightened securely.

Finally, the connecting cable is to be

secured with the mains cable cleat and

the covering closed by pressing rmly

(lock into place). Before switching on

for the first time, any protective foil or

stickers must be removed from the

glass ceramic surface.

Once connected to the mains

supply check that all cooking zones

are ready for use by briey switching

each on in turn at the maximum

setting.

Sticking on the seal

Clean the worktop around the cutout

area.

Stick the single-sided adhesive sealing

tape provided on the underside of the

hob around the outside edge ensuring

that it is not stretched. The two ends

of the tapeshould join in the middle of

one side. After trimming the tape

(allow it to overlap by 2-3 mm), press

the two ends together.

Operating noises

Depending on the material and the

processing of the base, the following

noises may occur when using

induction cooking zones.

1. Cracking noise

When using cookware made of

different materials (Sandwich

construction).

1. Whistling

When using an individual cooking zone

or several cooking zones with high

powers when the cookware is made of

dierent materials (Sandwich

construction).

2. Humming

Can occur at high power levels.

2. Clicking

During electric switching processes.

3. Hissing, buzzing

The device fitted with a fan for cooling

the electrics. A whiring noise can be

heard when operating the fan which

may deviate depending on the

performance and may continue for a

while after the appliance is switched

off. The noises described are normal

and do not refer to any defects.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Comentarios a estos manuales

Sin comentarios