Electrolux GK78TSO Manual de usuario descargar pdf (Pagina 14)

8.4 Electrical connection

Install the hob with a socket supply line. If

there is no socket supply line, the fixed

home electrical system must include an

isolating device with at least a 3 mm-

contact separation to enable a

simultaneous and all-pole cut off from the

mains (according to NIN SEV 1000).

1

2

3

1

2

3

1

2

3

1

2

3

8.5 Attaching the seal to the

rabbet

1. Clean the rabbets in the worktop.

2. Cut the supplied seal stripe into 4

stripes. The stripes must have the

same length as the rabbets.

3. Cut the ends of the stripes at an angle

of 45°. They should fit in the corners

of the rabbets accurately.

4. Attach the stripes to the rabbets. Do

not extend the stripes. Do not bond

ends of stripes one over another.

After you assemble the hob, seal the

remaining gap between glass ceramic and

the worktop with silicon. Make sure the

silicon does not get under the glass

ceramic.

8.6 Assembly

min.

50mm

min.

500mm

776+1mm

516+1mm

490+1mm

750+1mm

min. 600mm

R10mm

R5mm

13mm

7mm

www.electrolux.com14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios