Electrolux ZGS 782 ICT Manual de usuario descargar pdf (Pagina 20)

Fitting the Hob into the Worktop

Carry out the building in of the hob as

follows:

• place the seals supplied with the

hob on the front edge of the cut

out. Then, place them at 86 mm

from the side edges and at 10 mm

from the rear edge, as shown in

the diagram, taking care that the

seals meet without overlapping.

• place the hob in the cut out,

taking care that it is centred;

• fix the hob with the relevant fixing

clamps and screws, as shown in

the diagram. When the screws

have been tightened, the excess

seal can be removed.

The edge of the hob forms a double seal

which prevents the ingress of liquids.

Seal

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sin comentarios

Electrolux ZGS 782 ICT Manual de usuario Pagina 20