Electrolux EBGL4XSP Manual de usuario descargar pdf (Pagina 12)

7.2 Setting and changing the

time

After the first connection to the mains,

wait until the display shows and 12:00.

"12" flashes.

1. Touch or to set the hours.

2. Touch

.

3. Touch or to set the minutes.

4. Touch or .

The display shows the new time.

To change the time of day touch again

and again until starts to flash.

7.3 Setting the DURATION

1. Set a heating function and

temperature.

2. Press again and again until

starts to flash.

3. Use or to set the minutes for

DURATION time.

4. Press or the DURATION time

starts automatically after 5 seconds.

5. Use or to set the hours for

DURATION time.

6. Press . The DURATION time starts

automatically after 5 seconds.

When the set time ends, the signal sounds

for 2 minutes. and time setting flash in

the display. The oven turns off.

7. Press a sensor field to stop the signal.

8. Turn off the oven.

7.4 Setting the END

1. Set an oven function and temperature.

2. Touch

again and again until

starts to flash.

3. Use or to set the END and

to confirm. First you set the minutes

and then the hours.

When the set time ends, an acoustic

signal sounds for 2 minutes. and the

time setting flash in the display. The

appliance deactivates automatically.

4. Touch a sensor field to stop the

acoustic signal.

5. Turn off the appliance.

7.5 Setting the TIME DELAY

function

1. Set an oven function and temperature.

2. Touch again and again until

starts to flash.

3. Use or to set the minutes for

DURATION.

4. Touch .

5. Use or to set the hours for

DURATION.

6. Touch , the appliance switches to

the setting of the END function.

The display shows flashing .

7. Use or to set the END and

to confirm. First you set the minutes

and then the hours.

Appliance turns on automatically later on,

works for the set DURATION time and

stops at the set END time. At the set time

an acoustic signal sounds for 2 minutes.

and the time setting flash in the

display. The appliance deactivates

automatically.

8. Touch a sensor field to stop the

acoustic signal.

9. Turn off the appliance.

7.6 Setting the MINUTE MINDER

1. Touch .

and "00" flash in the display.

2. Use

to switch between options.

First you set the seconds, then the

minutes and the hours.

3. Use or to set the MINUTE

MINDER and to confirm.

4. Touch or the MINUTE MINDER

starts automatically after 5 seconds.

When the set time ends, an acoustic

signal sounds for 2 minutes and 00:00

and flash in the display.

5. Touch a sensor field to stop the

acoustic signal.

7.7 COUNT UP TIMER

1. To reset the Count Up Timer press:

and at the same time .

www.electrolux.com12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comentarios a estos manuales

Sin comentarios