Electrolux ControlBox24/7 Manual de usuario descargar pdf (Pagina 9)

PROGRAMMING

Temperature warning

The unit will automatically report if the temperature will exceed the set value. The default setting for low temperature alarm is +5°C and for high

temperature 30°. These values can be changed to between 0°C and +50°C. To change a set value, send the following text message to the unit:

Request current temperature

To see what the current temperature is where your ControlBox24/7 is located, send the following text message to the unit:

TEMP

LOW TEMPERATURE ALARM

LTWARN <NUMBER> Example: LTWARN 12

The example above will cause the unit to send a warning report when the

temperature falls below 12°C, as

“Temperature - LOW”.

If the temperature then increases again and reaches the set value,

another message will be sent saying:

“Temperature - RESTORED”

The unit’s temperature warning function can be easily activated or

deactivated using the following command:

Activation: LTWON (default setting)

Deactivation: LTWOFF

HIGH TEMPERATURE ALARM

HTWARN <NUMBER> Example: HTWARN 27

The example above will cause the unit to send a warning report when the

temperature exceeds 27°C as

“Temperature - HIGH”.

If the temperature then decreases again and reaches the set value,

another message will be sent saying:

“Temperature - RESTORED”

The unit’s temperate warning function can be easily activated or

deactivated using the following command:

Activation: HTWON

Deactivation: HTWOFF (default setting)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Sin comentarios

Electrolux ControlBox24/7 Manual de usuario Pagina 9