Electrolux WS290SLSP Manual de usuario descargar pdf (Pagina 49)

ENGLISH 49

Installation

 During installation, follow the instructions supplied

separately.

 Only qualified personnel can install the appliance

and replace the cable.

 The electric system must be equipped with a means

for disconnection, with a contact separation in all

poles that provides full disconnection under

overvoltage category III.

 If a plug is used for the electric connection, then it

must be accessible after installation.

 The connection should include correct earthing, in

compliance with current norms.

 WARNING! Before connecting the appliance

compare the power data (voltage and frequency)

indicated on the characteristics plate with those of

the power supply in question. If these data do not

match there may be problems. In case of doubt,

contact an electrician.

 WARNING! If the electrical wire plug is removed,

the appliance must be installed and connected by a

technician. Contact a qualified electrician who knows

and respects current safety standards. The

manufacturer cannot be held responsible for

damage resulting from fitting or connecting errors.

 WARNING! The electrical safety of the appliance

can only be guaranteed if it is earthed. The

manufacturer cannot be held responsible for

damage resulting from the absence of or defects in

the installation’s protection system (e.g. electrical

shock).

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 67 68

Comentarios a estos manuales

Sin comentarios