Electrolux C 9 18 44-5 i Manual de instalación descargar pdf (Pagina 30)

Installation

     

     

6600

6601

5862

6604

6602

"HEAT"

Steam connection

Inlet pipes connected to the machine must be

equipped with a manual shut-off valve to facili-

tate installation and servicing.

The connection hose must be of type ISO/1307-

1983 or equivalent. Connection size at ﬁlter:

DN 15 (BSP 1/2").

Steam pressure required:

 • minimum:7psi(50kPa)

 • maximum:115psi(800kPa)

• rec. pressure: 600 kPa (6 kp/cm

)

• Remove top cover (A).

• Remove casing (B).

• Mountthearticulatednippletothesteam

valve.

• Mountthesteamvalveonthemachine.

• Mountnipple,strainerandelbow.Notethe

direction of the strainer. Mount steam hose to

the elbow.

Check that there are no sharp angles or bends

on the connected steam hose.

• Mountthehosewithwiresbetweensteam

valve and machine.

Connect wires in the steam valve.

Connect ground cable to the terminal ground

connection.

Connect the ”HEAT” cable connector to the

”HEAT” terminal on the I/O board.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Sin comentarios

Electrolux C 9 18 44-5 i Manual de instalación Pagina 30