Electrolux EU 0561 C Manual de instalación descargar pdf (Pagina 19)

0408

INSTALLATION

MANUAL

Notice Date Page

05405004

4. Installation

Repeat operations points 1, 2 and 3, the tray should now move back.

Turn the main switch off.

Reinstall the side panels and lock the ﬁ xing screws.

Remove the protective paper from around the cylinder.

The ironing machine is now ready to be used.

Nota: At the ﬁ rst use, it is necessary to leave the cylinder heated turn for about one hour to allow the

padding to ram. This running in allows to get a space between the tray and the cylinder in order to feed

the linen easily.

•

If the functionning of the machine does not correspond to either case (A) or (B), stop the

machine with the On/off switch (Fig.8), put the main switch to off and invert the 2 phase wires

on the power supply terminal block (Fig.4).

Phases in good order and bed closed

Phases in good order and bed opened

When starting up the ironer, the bed remains

closed, the cylinder rotates the right way but

the hand safety device is inoperative.

Do not use the machine.

Modify the phases order (see below)

When starting up the ironer, the cylinder

rotates the wrong way and the bed blocks in

rear position.

Release the bed and modify the phases order

(see below and next page).

Inverted phases and bed closed

Inverted phases and bed opened

When starting up the ironer, the cylinder does

not rotate and the bed moves away from the

cylinder.

Everything is OK.

You can operate the ironer.

When starting up the ironer, the cylinder does

not rotate and the bed does not move.

Everything is OK.

You can operate the machine.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Sin comentarios

Electrolux EU 0561 C Manual de instalación Pagina 19