
6. WHAT TO DO IF…
During operation of the appliance some
smaller but annoying trouble can often oc-
cur, which does not require calling a tech-
nician out. In the following chart informa-
tion is given about them to avoid unnec-
essary charges on service.
The operation of the appliance
goes with certain sounds (com-
pressor and circulating sound).
This not means a trouble, but a
normal operation.
The appliance operates discontin-
uously, so the stopping of com-
pressor does not mean being no
current. That is why you must not
touch the electrical parts of the
appliance before breaking the cir-
cuit.
Problem Possible cause Solution
The appliance is
noisy.
The appliance is not sup-
ported properly.
Check if the appliance
stands stable (all feet and
wheels should be on the
floor). Refer to "Levelling".
The buzzer sounds.
The Alarm light
flashing.
The temperature in the
freezer is too high.
Refer to "Temperature
Alarm"
Three Temperature
indicators flashing.
An error has occurred in
measuring the tempera-
ture.
Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not be
possible).
The compressor
runs continuously.
The Temperature regulator
may be set incorrectly.
Set a warmer temperature.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The door has been
opened too frequently.
Do not keep the door open
longer than necessary.
The food temperature is
too high.
Let the food temperature
decrease to room tempera-
ture before storage.
The room temperature is
too warm.
Decrease the room temper-
ature.
There is too much
frost and ice.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The door gasket is de-
formed or dirty.
Refer to "Closing the door".
The temperature in
the appliance is too
cold.
The Temperature regulator
may be set incorrectly.
Set a warmer temperature.
10
www.electrolux.com
Comentarios a estos manuales