Electrolux TG09112 Manual de usuario descargar pdf (Pagina 62)

9.4 Door reversibility

To carry out the following opera-

tions, we suggest that this be

made with another person that will

keep a firm hold on the doors of

the appliance during the opera-

tions.

To change the opening direction of the

door, do these steps:

• Remove the plug from the power sock-

et.

• Tilt back the appliance carefully so that

the compressor cannot touch the floor.

• Unscrew the left foot.

• Remove the lower door hinge by un-

screwing the 2 retaining screws.

• Remove the hinge pin from the bottom

of the door.

• Slot the hinge pin into the hole in the

hinge plate.

• Take the door off.

• Refit the upper hinge pin into the oppo-

site location.

• Fit the door in place on the hinge pin.

• Slot the hinge pin into the hole in the

hinge plate and relocate the hinge as-

sembly to the opposite location and re-

fit using the retaining screws.

• Refit the bottom hinge plate assembly

on the opposite side, taking care that

the edge of the door is parallel with the

side of the cabinet.

1

2

• Remove and install the handle (if fore-

seen)on the opposite side.

• Reposition, level the appliance, wait for

at least four hours and then connect it

to the power socket.

Do a final check to make sure that:

• All screws are tightened.

• The door opens and closes correctly.

62

www.electrolux.com

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 68

Comentarios a estos manuales

Sin comentarios