Electrolux EW8F2946GBM Manual de usuario descargar pdf (Pagina 32)

• - No communication between electronic elements of the appliance. Switch it

off and switch on again. The programme was not finished properly or the appliance

stopped too early. If the alarm code appears again, contact the Authorised Service

Centre.

• - The appliance does not fill with water properly. After the proper check, start

the appliance again by pressing Start/Pause button the appliance tries to

resume the cycle . If the error persists the alarm code will appear again.

•

- The appliance does not drain the water.

• - The appliance door is open or not closed correctly. Please check the door!

If the appliance is overloaded, remove some items from the drum

and/or hold the door shut while touching the Start/Pause button

until the indicator stops flashing (see the picture below).

14.2 Possible failures

Problem Possible solution

The programme does

not start.

• Make sure that the mains plug is connected to the

mains socket.

• Make sure that the appliance door is closed.

• Make sure that there is no damaged fuse in the fuse

box.

• Make sure that the Start/Pause has been touched.

• If the delay start is set, cancel the setting or wait for the

end of countdown.

• Deactivate the Child Lock function if it is on.

• Check the position of the knob on the selected pro‐

gramme.

The appliance does not

fill with water properly.

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not

too low. For this information, contact your local water

authority.

• Make sure that the water tap is not clogged.

• Make sure that the inlet hose has no kinks, damages or

bends.

• Make sure that the connection of the water inlet hose is

correct.

www.electrolux.com32

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 79 80

Sin comentarios

Electrolux EW8F2946GBM Manual de usuario Pagina 32