Electrolux EBSL80CN Manual de usuario descargar pdf (Pagina 22)

11.5 Replacing the lamp

Put a cloth on the bottom of the interior of

the appliance. It prevents damage to the

lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The top lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a halogen, 230

V, 40 W, 300 °C heat resistant lamp.

4. Install the glass cover.

The side lamp

1. Remove the left shelf support to get

access to the lamp.

2. Use a narrow, blunt object (e.g. a

teaspoon) to remove the glass cover.

3. Clean the glass cover.

4. Replace the lamp with a halogen, 230

V, 40 W, 300 °C heat resistant lamp.

5. Install the glass cover.

6. Install the left shelf support.

12. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

12.1 What to do if...

Problem Possible cause Remedy

You cannot activate or op-

erate the oven.

The oven is not connected

to an electrical supply or it

is connected incorrectly.

Check if the oven is correct-

ly connected to the electri-

cal supply (refer to the con-

nection diagram if available).

The oven does not heat up. The oven is deactivated. Activate the oven.

The oven does not heat up. The clock is not set. Set the clock.

The oven does not heat up. The necessary settings are

not set.

Make sure that the settings

are correct.

www.electrolux.com22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Comentarios a estos manuales

Sin comentarios

Electrolux EBSL80CN Manual de usuario Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Electrolux EBSL80CN