Electrolux EGG6042NOW Manual de usuario

EGG6042EN HOB USER MANUAL

• Remove when the hob issufficiently cool: limescale rings,water rings, fat stains, shiny metallicdiscoloration. Clean the hob with amoist cloth and s

7.3 Labels supplied with theaccessories bagStick the adhesive labels as indicatedbelow:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NO.

required even if the volume is between 5m³ and 11 m³.If there are other fuel burning appliances inthe same room, B.S. 5440 Part 2 CurrentEdition, shou

8.4 Injectors replacement1. Remove the pan supports.2. Remove the caps and crowns of theburner.3. With a socket spanner 7 remove theinjectors and repl

The appliance is supplied with a 3 coreflexible power cable with a 3 amp plug. If itis necessary to change the fuse, use a 3amp ASTA-approved (BS 1362

ABA) supplied sealB) supplied bracketsCAUTION!Install the appliance only on aworktop with flat surface.8.9 Possibilities for insertionThe panel instal

Appliance category: II2H3+ Gas connection: R 1/2" Appliance class: 3 9.4 Gas burners for NATURAL GAS G20 20 mbarBURNER NORMAL POWERkWMINIMUM P

ENGLISH17

www.electrolux.com18

ENGLISH19

CONTENTS1. SAFETY INFORMATION... 32. SAFETY INSTRUCTIONS...

www.electrolux.com/shop867305071-GB-072014

1. SAFETY INFORMATIONBefore the installation and use of the appliance, carefullyread the supplied instructions. The manufacturer is notresponsible i

• Metallic objects such as knives, forks, spoons and lidsshould not be placed on the hob surface since they canget hot.• Do not use a steam cleaner to

with the power supply. If not, contactan electrician.• Make sure the appliance is installedcorrectly. Loose and incorrectelectricity mains cable or pl

temperature than oil used for the firsttime.• Do not put flammable products oritems that are wet with flammableproducts in, near or on the appliance.W

3. PRODUCT DESCRIPTION3.1 Cooking surface layout21 341Rapid burner2Semi-rapid burner3Auxiliary burner4Control knobs3.2 Control knobSymbol Descriptionn

lets the thermocouple warm up. If not,the gas supply is interrupted.3. Adjust the flame after it is regular.If after some tries the burnerdoes not lig

CAUTION!Make sure that the pots areplaced centrally on theburners in order to getmaximum stability and to getlower gas consumption.5.2 Energy saving•