Electrolux EHD90LLUM Manual de usuario descargar pdf (Pagina 24)

Cutting the benchtop out

• Thebenchcutoutneedstobesizedby

using the supplied template.

• Acuttingaccuracyof1.5mmeither

side of the marked area needs to be

maintained.

Pull down clamps

• Thesearesuppliedinapartsbag

consisting of 4 clamps and 4 screws.

• Theclampsshouldbepre-assembled

onto the 4 brackets before dropping the

unit into the cutout.

Rubber seal

• Anoversizedlengthofrubbersealis

supplied in the parts pack

• Thisshouldbepushedintotherecess

ontheundersideoftheframe.Thejoin

should lie in the middle of one side.

• Thesealwillhavetobecuttolength

(add a few mm) and then the two ends

pushed up against one another.

20 installation instructions electrolux induction cooktop

Installation instructions

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30

Sin comentarios

Electrolux EHD90LLUM Manual de usuario Pagina 24