Electrolux EKG64100OX Manual de usuario descargar pdf (Pagina 29)

AB

2. Release the screw C, which keep the

burner in position.

C

3. Carefully move the burner off the

injector support D.

D

E

F

4. Slowly move it to the left side. Make

sure that the burner bush stays on

the burner mouthpiece. Do not apply

force to the wire of the spark plug

connector F and to the thermocouple

conductor E.

5. Release the burner injector D with a

7 mm socket spanner and replace it

with a different one.

Assemble the burner in a revers

sequence.

Replace the gas type sticker near the

gas supply ramp with the one related to

the new gas type.

14.14 Adjusting the minimum

gas level on the oven burner

1. Disconnect the appliance from the

electricity.

2. Remove the knob for the oven

functions. If there is no access to the

bypass screw dismount the control

panel before adjustment start.

3. With a thin and flat screwdriver adjust

the bypass screw A.

The model determines the position of

the bypass screw A.

A

Changing from natural gas to

liquid gas

1. Fully tighten the bypass screw.

2. Put the knob back.

3. Connect the appliance to the

electricity.

ENGLISH 29

1 2 ... 24 25 26 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios