Electrolux EON3010AOX Manual de usuario descargar pdf (Pagina 20)

screen-printing zones is not rough when

you touch it.

A B

Make sure that you install the middle

panel of glass in the seats correctly.

8.7 Replacing the lamp

Put a cloth on the bottom of the interior

of the appliance. It prevents damage to

the lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

CAUTION!

Always hold the halogen

lamp with a cloth to prevent

grease residue from burning

on the lamp.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300

°C heat-resistant lamp.

4. Install the glass cover.

9. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

9.1 What to do if...

Problem Possible cause Remedy

The cooking zones do not

operate.

Refer to the operating instructions for the built-in cook‐

ing surface.

The oven does not heat

up.

The oven is deactivated. Activate the oven.

www.electrolux.com20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

Comentarios a estos manuales

Sin comentarios

Electrolux EON3010AOX Manual de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Electrolux EON3010AOX