Electrolux WOK38TSIO Manual de usuario descargar pdf (Pagina 11)

Warning! Sharp objects and abrasive

cleaning agents will damage the

appliance.

For your safety, do not clean the appli-

ance with steam blasters or high-pres-

sure cleaners.

Scratches or dark stains on the glass

ceramic have no effect on how the ap-

pliance operates.

To remove the dirt:

1. – Remove immediately:melted plas-

tic, plastic foil, and food with sugar. If

not, the dirt can cause damage to

the appliance. Use a special scraper

for the glass .

– Remove after the appliance is

sufficiently cool:limescale rings ,

water rings, fat stains, shiny metallic

discolorations. Use a special cleaning

agent for glass ceramic or stainless

steel.

2. Clean the appliance with a moist cloth

and some detergent.

3. At the end rub the appliance dry

with a clean cloth.

CLEANING THE WOK PAN (WOK P6)

• Clean the wok pan thoroughly inside and

out with washing up liquid after every

use.

• Soften heavy deposits with hot water. If

necessary, clean with a commercially

available chromium steel cleaner and a

sponge.

• Blue discolourations, limescale stains or

protein stains are best removed with vin-

egar or lime juice.

TROUBLESHOOTING

Problem Possible cause Remedy

You cannot activate the appli-

ance or operate it.

Activate the appliance again

and set the heat setting in less

than 10 seconds.

You touched 2 or more sensor

fields at the same time.

Touch only one sensor field.

The STOP+GO function oper-

ates.

Refer to the chapter “Daily Use”.

There is water or fat stains on

the control panel.

Clean the control panel.

An acoustic signal sounds and

the appliance deactivates.

An acoustic signal sounds

when the appliance is deactiva-

ted.

You put something on one or

more sensor fields.

Remove the object from the

sensor fields.

The appliance deactivates. You put something on the sen-

sor field

.

Remove the object from the

sensor field.

The residual heat indicator

does not come on.

The cooking zone is not hot

because it operated only for a

short time.

If the cooking zone operated

sufficiently long to be hot, speak

to the service centre.

The heat setting changes be-

tween two levels.

The Power management is ac-

tivated.

Refer to “Power management”.

The sensor fields become hot. The cookware is too large or

you put it too near to the con-

trols.

Put large cookware on the rear

cooking zones if necessary.

electrolux 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comentarios a estos manuales

Sin comentarios