Electrolux DASL6030SW Manual de usuario descargar pdf (Pagina 14)

14 electrolux

Replacing the halogen bulbs

Remedial action in the event of faults

Check whether you can correct any minor faults on the appliance yourself, by means of the

following instructions. If this information is of no help in your speciﬁc case, please contact

After Sales.

The extractor hood must be discon-

nected from the mains supply. (Pull

out the plug or switch off the circuit

breaker.)

Caution! All the bulbs become hot; be

careful when replacing them.

Caution! Do not use dimmable LED‘s !

Please note that energy-saving halo-

gen bulbs rated at 230 volts up to a

maximum of 25 watts can be used for

this appliance, or especially low-energy

bulbs with a GU10 ﬁtting, rated at 250

volts and 3 to 7 watts (e.g. IP64-rated

LEDs).

Please bear in mind that halogen bulbs

have to be specially disposed of. You

can hand these back at any appropriate

sales outlet.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios