Electrolux EBPL60SP Manual de usuario descargar pdf (Pagina 42)

12. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

12.1 Notes on cleaning

• Clean the front of the appliance with a

soft cloth with warm water and a

cleaning agent.

• To clean metal surfaces, use a

dedicated cleaning agent.

• Clean the appliance interior after each

use. Fat accumulation or other food

remains may result in a fire. The risk

is higher for the grill pan.

• Clean stubborn dirt with a special

oven cleaner.

• Clean all accessories after each use

and let them dry. Use a soft cloth with

warm water and a cleaning agent.

• If you have nonstick accessories, do

not clean them using aggressive

agents, sharp-edged objects or a

dishwasher. It can cause damage to

the nonstick coating.

12.2 Removing the shelf

supports

Before maintenance, make sure that the

appliance is cool. There is a risk of

burns.

To clean the appliance, remove the shelf

supports.

1. Pull carefully the supports up and out

of the front catch.

2. Pull the front end of the shelf support

away from the side wall.

3. Pull the supports out of the rear

catch.

Install the shelf supports in the opposite

sequence.

12.3 Catalysis

Menu / Functions / Cleaning

Remove all accessories and removable

shelf supports.

The walls with a catalytic coating are

self-cleaning. They absorb fat which

collects on the walls while the appliance

operates.

The catalytic cleaning

procedure cannot start if you

do not remove the shelf

support or telescopic shelf

runners (if present).

Spots or discolouration of

the catalytic surface have no

effect on catalytic properties.

During the catalytic cleaning the oven

lamp is off.

1. Select the function: Catalysis in the

menu: Cleaning.

The display shows the time of day and

the duration of the cleaning procedure (1

hour). You cannot change the duration,

but you can delay the start of the

cleaning procedure with the function: Set

End Time.

An acoustic signal sounds after the time

ends. The appliance deactivates.

2. Touch a sensor field or open the

oven door to stop the signal.

3. Wipe the bottom of the appliance

with a soft and moist sponge.

12.4 Removing and installing

the door

You can remove the door to clean it.

WARNING!

Be careful when you remove

the door from the appliance.

The door is heavy.

1. Open the door fully.

2. Fully press the clamping levers (A)

on the two door hinges.

www.electrolux.com42

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 51 52

Comentarios a estos manuales

Sin comentarios