Electrolux EOB9958ZOZ Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Look for the oven model and Wi-Fi
Module Software version on http://
electrolux.opensoftwarerepository.com
inside "NIUX" folder.
5.3 First connection to the
mains
When you connect the oven to the mains
you have to set the language, the time,
the clock format, the date, the fast heat-
up, the water hardness level .
Select the values and press OK to
confirm. You can change the settings in
the menu: Basic Settings.
5.4 Setting the water hardness
The table below shows the water
hardness range (dH) with the
corresponding Calcium deposit and the
quality of the water.
Water hardness Calcium deposit
(mmol/l)
Calcium deposit
(mg/l)
Water clas‐
sification
Class dH
1 0 - 7 0 - 1.3 0 - 50 Soft
2 7 - 14 1.3 - 2.5 50 - 100 Moderately
hard
3 14 - 21 2.5 - 3.8 100 - 150 Hard
4 over 21 over 3.8 over 150 Very hard
When the water hardness exceeds the
values in the table, fill the water drawer
with bottled water.
1. Take the 4 colour change strip
supplied with the steam set in the
oven.
2. Put all the reaction zones of the strip
into the water for approximately 1
second.
Do not put the strip into the running
water.
3. Shake the strip to remove the excess
of the water.
4. Wait 1 minute and check the water
hardness with the table below.
The colours of the reaction zones
continue to change. Do not check the
water hardness later than 1 minute
after test.
5. Set the water hardness: menu: Basic
Settings.
Test strip Water hardness
1
Test strip Water hardness
2
3
4
You can change the water hardness in
the menu: Basic Settings / Water
hardness.
5.5 Wireless connection
To connect the oven you need:
Wireless network with Internet
connection.
Mobile device connected to your
wireless network.
1. Turn on the oven.
2. Choose wireless network with
Internet connection.
3. Press YES to confirm.
Oven wireless module will start after 1
minute. To configure the wireless
connection at any other time press on
the display.
ENGLISH 11
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 67 68

Comentarios a estos manuales

Sin comentarios