Electrolux EON64100X Manual de usuario descargar pdf (Pagina 21)

2. Pull the rear shelf support rail away from

the side wall and remove it.

2

1

Installing the shelf support rails

Install the shelf support rails in opposite se-

quence.

Important! The rounded ends of the

shelf support rails must point to the front!

Oven lamp

Warning! There is a danger of

electrical shock!

Before you change the oven lamp:

• Switch off the oven.

• Remove the fuses in the fuse box or

switch off the circuit breaker.

Put a cloth on the bottom of the oven

for protection of the oven light and

glass cover.

Replacing the oven light bulb/cleaning the

glass cover

1. Turn the glass cover anti-clockwise to re-

move it.

2. Clean the glass cover.

3. Replace the oven light bulb with applica-

ble 300°C heat-resistant oven light bulb.

4. Install the glass cover.

Replacing the oven lamp:

1. You can find the lamp glass cover at the

left side of the cavity. Remove the left

shelf support rail.

2. Use a narrow, blunt object (e.g. a tea-

spoon) to take off the glass cover and

clean it.

3. If necessary: Replace the oven lamp

with applicable 300°C heat-resistant

oven lamp.

Use the same oven lamp type.

4. Install the glass cover.

5. Install the left shelf support rail.

Oven door and glass panels

To clean the oven door remove it.

Caution! Be careful when you remove

the door from the appliance. The door

is heavy!

Removing the oven door

1. Open the oven door as far as it goes.

2. Lift up clamping levers (A) on the two

door hinges fully.

A

A

3. Close the oven door until the first posi-

tion (angle approx. 45°).

electrolux 21

1 2 ... 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios