Electrolux EQ98X Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 16
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
6 using your cooktop electrolux keyhole cooktop
Lock and unlock the control touch sensors
The induction touch sensors, with the exception of the
On/Off touch sensor, can be locked at any time in order
to prevent the settings being changed. These controls can
be locked whilst the unit is either On or Off.
Step Control Panel Display Indicator light
Switch on
Touch
for
4 seconds
L for 5
seconds
Lights up +
beeps
Switch off
Touch
for
4 seconds
none
Goes out +
beeps
tips and information
The lock function can prevent unintentional use of the
induction unit for example when cleaning.
warning
If the induction unit is on and the controls locked the
unit can still be turned off immediately if needed by
touching the
On/Off touch sensor.
warning
If you lock the induction unit controls after the unit
has been turned off, the lock indicator light and the
display will turn off after 5 seconds. When you want
to use the induction unit you will need to unlock the
controls first.
Using the timer
The timer can be set to a maximum of 2 hours and the
display shows the time in hours & minutes. One minute is
displayed as “0:01” and one hour is displayed as “1:00”.
Step Control Panel Display Indicator light
Activate
Touch
for 1
second
00
Lights up
+ beeps
Increase
Touch
for 1
second or hold
00 to 2:00
Lights up
+ beeps
Decrease
Touch
for 1
second or hold
2:00 to 00
Lights up
+ beeps
Switch off
Touch
and
together
for 1 second
00
Lights up
on power
Using your cooktop
When the set time reaches “0” an audible signal (3X) will
sound. Select any touch sensor to stop the audible signal.
NOTE! The power will need to be turned off separately if
required.
tips and information
To change the set time simply select the or
touch
sensor anytime whilst the time is displayed.
When setting the time using the or
touch sensor,
the longer you hold your nger on the touch sensor the
faster the display changes.
When the timer is set and counting down if you wish to see
the power level setting, select the power touch sensor.
To return to timer display you will need to select the timer
touch sensor.
NOTE: If the control is locked, the unit must be unlocked
before any changes can be made.
Settings with no activity
Heat setting Switches off after
0
10 seconds
1-2
6 hours
3-4
5 hours
5
4 hours
6-9
1.5 hours
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comentarios a estos manuales

Sin comentarios