Electrolux ESI6200LOX Manual de usuario descargar pdf (Pagina 26)

A1

A2

2.

To disassemble the filter (A), pull

apart (A1) and (A2).

3.

Remove the filter (B).

4.

Wash the filters with water.

5.

Put the filter (B) to its initial position.

Make sure that it assembles correctly

under the two guides (C).

6.

Assemble the filter (A) and put it into

position in filter (B). Turn it clockwise

until it locks.

An incorrect position of the filters

can cause bad washing results

and damage to the appliance.

8.2 Cleaning the spray arms

Do not remove the spray arms.

If the holes in the spray arms are clogged,

remove remaining parts of soil with a thin

pointed object.

8.3 External cleaning

Clean the appliance with a moist soft

cloth.

Only use neutral detergents. Do not use

abrasive products, abrasive cleaning pads

or solvents.

9. TROUBLESHOOTING

The appliance does not start or it stops

during operation.

Before you contact the Service, refer to

the information that follows for a solution

to the problem.

With some problems, the end indica-

tor flashes intermittently to show an

alarm code.

Alarm code Problem

• The end indicator flashes 1 time in-

termittently.

• Start indicator flashes continuously.

The appliance does not fill with water.

• The end indicator flashes 2 times in-

termittently.

• Start indicator flashes continuously.

The appliance does not drain the water.

• The end indicator flashes 3 times in-

termittently.

• Start indicator flashes continuously.

The anti-flood device is on.

26

www.electrolux.com

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 75 76

Comentarios a estos manuales

Sin comentarios