Electrolux EBSL80CN Manual de usuario descargar pdf (Pagina 20)

agents, sharp-edged objects or a

dishwasher. It can cause damage to

the nonstick coating.

• Dry the oven when the cavity is wet

after usage.

11.2 Removing the shelf

supports

To clean the oven, remove the shelf

supports.

1. Pull the front of the shelf support away

from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove it.

2

1

Install the shelf supports in the opposite

sequence.

11.3 Pyrolysis

CAUTION!

Remove all accessories and

removable shelf supports.

The pyrolytic cleaning

procedure cannot start:

• if you did not remove the core

temperature sensor plug from the

socket.

• if you did not fully close the oven door.

Remove the worst dirt manually.

CAUTION!

If there are other appliances

installed in the same cabinet,

do not use them at the same

time as the function:

Pyrolysis. It can cause

damage to the appliance.

1. Clean the inner side of the door with

hot water, so that the residues do not

burn from the hot air.

2. Activate the appliance and select from

the main menu the function: Pyrolysis.

Press to confirm.

3. Set the duration of the cleaning

procedure:

Option Description

Quick 1 h for a low

degree of dirt

Normal 1 h 30 min

for a usual

degree of dirt

Intense 2 h 30 min

for a high de-

gree of dirt

4. Touch to confirm.

When the pyrolytic cleaning

starts, the appliance door is

locked and the lamp does not

work.

To stop the pyrolytic cleaning

before it is completed,

deactivate the appliance.

WARNING!

After the function is

completed, the appliance is

very hot. Let it cool down.

There is a risk of burns.

After the function is

completed, the door stays

locked for the cool down

phase. Some of the appliance

functions are not available

during the cool down phase.

www.electrolux.com20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Comentarios a estos manuales

Sin comentarios