Electrolux EKM90450X Manual de usuario Pagina 28

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 32
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 27
28
Setting
To set, press and release the desired function, and within 5 seconds
set the time using the + and - buttons.
+ and - buttons.
The + and - buttons increase and decrease the time respectively the
speed depending on how long the button is pressed.
Setting the time
Press any two buttons (cooking time, end time, minute minder) at the
same time, and + or - button to set the desired time. This deletes any
previously set programme. The contacts are switched off and the
AUTO symbol flashes.
Manual use
When the manual button is pressed the relay contacts switch on, the
AUTO symbol switches off and the saucepan symbol lights up.
Manual operation can only be enabled after the automatic programme
is over it has been cancelled.
Automatic function
Press the cooking time or end time button to switch automatically from
the manual to the automatic function.
Minute minder
Cooking time
Cooking end
Manual
Decrease time
Increase time
GB
Display
4-digit, 7-section display for cooking times and clock.
Cooking time and manual function = saucepan symbol
Automatic function = AUTO
Minutes minder = bell symbol
The symbols light up when the corresponding functions are selected.
LED PROGRAMMER (Fig. 4)
Features
24 hours clock with automatic timer and minute minder.
Functions
Cooking time, cooking end time, manual position, clock,
minute minder, maximum programmable time 23 hours 59 minutes.
Acoustic signal
The acoustic signal sounds at the end of a programme or of the
minutes minder function and it lasts for a maximum of 15 minutes.
To stop it, push any one of the functions buttons.
Start programme and check
The programme starts 4 seconds after it has been set.
The programme can be verified at any time by pressing the
corresponding button.
Setting error
A setting error is made if the time of day on the clock falls within the
cooking start and end times.
To correct the setting error, change the cooking time or cooking end
time.
The relays switch off when a setting error is made.
Cancelling a setting
To cancel a setting, press the cooking time button and then press the
- button until 00 00 appears on the display.
A set programme will automatically cancel on completion.
button is pressed the next cooking end time is shown on the display.
Set the cooking end time with + button. The relay and the cooking
time symbol switch off.
The symbol lights up again when the cooking start time is reached.
When the cooking time is finished, the AUTO symbol flashes, the
acoustic signal sounds and both the cooking time symbol and the
relay switch off.
Minutes minder
Press the minute minder button and set the cooking time with + or -
button.
The bell symbol lights up when the minutes minder is operating.
When the set time is finished, the acoustic signal sounds and the bell
symbol switches off.
Semi-automatic use to set cooking time
Press the cooking time button and set the desired time with + or -.
The AUTO and cooking time symbols light up continuously. The relay
switches on immediately. When the cooking end time is reached, the
relay and cooking time symbol switch off, the acoustic signal sounds
and the AUTO symbol flashes.
Semi-automatic use to set end time
Press the end time button. The time of day appears on the display.
Set the cooking end time with + button. The AUTO and cooking time
symbols light up continuously. The relay contacts switch on. When
the cooking end time is reached, the relay and the cooking time symbol
switch off. When the cooking time is finished, the AUTO symbol
flashes, the acoustic signal sounds and both the relay and the cooking
time button switch off.
Fig. 4
Automatic use to set cooking time and end time
Press the cooking time button and select the duration of the cooking
time with + or - button. The AUTO and cooking time symbols light up
continuously. The relay switches on. When the cooking end time
INSTRUCTIONS FOR USING THE CONTROL DEVICE
A
U
T
O
Vista de pagina 27
1 2 ... 23 24 25 26 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios