Electrolux GK69FTIFO Manual de usuario descargar pdf (Pagina 12)

7.4 Heat setting

1. Activate the hob.

2. Place the pot on the selected cooking

zone.

The slider for the active cooking zone

appears on the display and is active for 8

seconds.

3. Touch or slide your finger to set the

desired heat setting.

The symbol turns red and becomes

bigger.

7.5 PowerBoost

This function activates more power for

the appropriate induction cooking zone; it

depends on the cookware size. The

function can be activated only for a

limited period of time.

1. Touch the desired zone symbol first.

2. Touch or slide your finger to the

right to activate the function for the

chosen cooking zone.

The symbol turns red and becomes

bigger.

The function deactivates automatically.

To deactivate the function manually

select the zone and change its heat

setting.

For maximum duration

values, refer to "Technical

data".

7.6 Power Management

• Cooking zones are grouped according

to the location and number of the

phases in the hob. See the illustration.

• Each phase has a maximum

electricity loading of 3680 W.

• The function divides the power

between cooking zones connected to

the same phase.

• The function activates when the total

electricity loading of the cooking

zones connected to a single phase

exceeds 3680 W.

• The function decreases the power of

the other cooking zones connected to

the same phase, which has an

influence on the available heat

setting.

• The maximum heat setting is visible

on the slider. Only the digits in white

are active.

• If a higher heat setting is not available

reduce it for the other cooking zones

first.

7.7 Bridge function

This function connects two cooking

zones and they operate as one with the

same heat setting.

You can use the function with large

cookware.

1. Place the cookware on two cooking

zones. The cookware must cover the

centres of both zones.

2. Touch to activate the function.

The zone symbol changes.

3. Set the heat setting.

The cookware must cover the centres of

both zones but not go beyond the area

marking.

www.electrolux.com12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comentarios a estos manuales

Sin comentarios