Electrolux GK69FTIFO Manual de usuario descargar pdf (Pagina 20)

Problem Possible cause Remedy

The display does not react

to the touch.

Part of the display is cov‐

ered or the pots are placed

too near to the display.

There is some liquid or an

object on the display.

Remove the objects. Move

the pots away from the dis‐

play.

Clean the display, wait un‐

til the appliance is cold.

Disconnect the hob from

the electrical supply. After

1 min, connect the hob

again.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactiva‐

ted.

You put something on one

or more sensor fields.

Remove the object from

the sensor fields.

The hob deactivates. You put something on the

sensor field .

Remove the object from

the sensor field.

Residual heat indicator

does not come on.

The zone is not hot be‐

cause it operated only for a

short time or the sensor is

damaged.

If the zone operated suffi‐

ciently long to be hot,

speak to an Authorised

Service Centre.

You cannot activate the

highest heat setting.

Another zone is already

set to the highest heat set‐

ting.

First reduce the power of

the other zone.

The sensor fields become

hot.

The cookware is too large

or you put it too near to the

controls.

Put large cookware on the

rear zones if possible.

Hob²Hood does not work. You covered the control

panel.

Remove the object from

the control panel.

Hob²Hood operates, but

only the light is on.

You activated the H1

mode.

Change the mode to H2 -

H6 or wait until the auto‐

matic mode starts.

Hob²Hood modes H1 - H6

operate, but the light is off.

There might be a problem

with the light bulb.

Contact an Authorised

Service Centre.

There is no sound when

you touch the panel sensor

fields.

The sounds are deactiva‐

ted.

Activate the sounds. Refer

to "Daily use".

www.electrolux.com20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios