
Problem Possible cause Remedy
comes on
The diameter of the bot-
tom of the cookware is
too small for the cooking
zone
Move cookware to a
smaller cooking zone
and number come on
There is an error in the
appliance
Disconnect the appliance
from the electrical supply
for some time. Discon-
nect the fuse from the
electrical system of the
house. Connect again. If
comes on again,
speak to the After Sales
Service
come on
There is an error in the
appliance, because a
cookware boils dry or you
use not correct cook-
ware. Overheating pro-
tection for the cooking
zone operates. The auto-
matic switch-off operates
Switch off the appliance.
Remove the hot cook-
ware. After approximately
30 seconds switch on the
cooking zone again.
should disappear, residu-
al heat indicator can stay.
Cool down the cookware
and check it with the sec-
tion Cookware for the in-
duction cooking zone
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
13. INSTALLATION
WARNING!
Refer to the Safety chapters.
Dimensions
Height 847 - 867 mm
Width 596 mm
Depth 600 mm
Oven capacity 74 l
Voltage 230 V
Frequency 50 Hz
13.1 Location of the appliance
You can install your freestanding appli-
ance with cabinets on one or two sides
and in the corner.
ENGLISH 33
Comentarios a estos manuales