
24 electrolux
Instructions for the Installer
Installation
This appliance cannot be posi-
tioned on a base.
The following instructions are meant for
a qualified installer, in order that the
operations of installation, regulation, and
service are executed according to the
existing regulations.
Whenever changes are mode involving
the disconnection of the appliance it is
necessary to proceed with maximum
caution.
THE MANUFACTURING COM-
PANY DECLINES ANY
RESPONSABILITY FOR POSSI-
BLE DAMAGES RESULTING
FROM AN INSTALLATION WHICH
DOES NOT COMPLY WITH THE
RULES IN FORCE.
Provision for ventilation
This appliance is not connected to a
combustion products evacuation device. It
shall be installed and connected in
accordance with the current installation
regulations. Particular attention shall be given
to the relevant requirements regarding
ventilation.
The use of a gas cooking appliance
results in the production of heat and moisture
in the room in which it is installed. Ensure
that the kitchen is well ventilated: keep
natural ventilation holes open or install a
mechanical ventilation device (mechanical
extractor hood).
Installation environnement
Warning - This unit can be installed and
can work only in constantly ventilated rooms,
according to rules in force.
In order to make the gas unit work
properly, it is necessary that air sufficient to
gas combustion can naturally flow in the
room. (The installer must follow the rules in
force).
The air flow into the room must come
directly through openings of external walls.
These openings (or opening) should be
realized in such a way not to be occluded
both from inside and outside.
Installation and maintenance must be
carried out by a qualified technician, in
compliance with rules in force.
The electric coonection must be carried
out in compliance rules in force.
Our responsability will not be in-
volved in case of accidents caused by a
defective or non existent earth connec-
tion.
Combustion products discharge
Gas cooking units must discharge
combustion products through hoods directly
connected to flues or outside.
Positioning
This appliance has been designed to be
placed close to furniture units not exceeding
the height of the working level.
Levelling
The appliance is provided with adjustable
small feet placed in the back corners of the
base.
Comentarios a estos manuales