
Make sure pots do not protrude over the
edges of the cooktop and that they are
centrally positioned on the rings in order
to obtain lower gas consumption.
Do not place unstable or deformed cook-
ware on the ring.
6. CARE AND CLEANING
WARNING!
Switch the appliance off and let it
cool down before you clean it.
Disconnect the appliance from the
electrical supply, before carrying
out any cleaning or maintenance
work.
WARNING!
For safety reasons, do not clean
the appliance with steam cleaners
or high-pressure cleaners.
WARNING!
Do not use abrasive cleaners,
steel wool pads or acids, they can
cause damage to the appliance.
You can remove the pan supports to easi-
ly clean the hob. After cleaning the hob,
make sure the pan supports are correctly
positioned. Pay attention when you re-
place the pan supports to prevent the
glass hob top from scratching. When you
wash the pan supports by hand, take
care when you dry them as the enamelling
process occasionally leaves rough edges.
If necessary, remove stubborn stains us-
ing a paste cleaner.
Removing the dirt:
1.
– Remove immediately: melting
plastic, plastic foil, and food con-
taining sugar. Use a special glass
ceramic scraper. Put the scraper
on the glass ceramic surface at an
acute angle and slide the blade on
the surface.
– Stop the appliance and let it
cool down before you clean: lime-
scale rings, water rings, fat stains,
shiny metallic discolorations. Use a
special cleaner for glass ceramic or
stainless steel.
2.
Clean the appliance with a damp
cloth and some detergent.
3.
At the end rub the appliance dry
with a clean cloth.
6.1 Cleaning the ignition candle
This model has a ceramic ignition candle
and a metal electrode. Keep these com-
ponents well clean to prevent difficult
lighting and check that the burner crown
holes are not blocked.
6.2 Periodic maintenance
Periodically speak your local Service
Force Centre to check the conditions of
the gas supply pipe and the pressure ad-
juster, if fitted.
8
www.electrolux.com
Comentarios a estos manuales