
7
GettingStart
GROUNDING INSTRUCTIONS
Do not, under any
circumstances, cut,
remove, or bypass the
grounding prong.
Power supply cord with
3-prong grounding plug
Grounding
type wall
receptacle
WarNiNg
This appliance is equipped with a 3-prong grounding plug for your protection
against shock hazard and should be plugged directly into a properly grounded
receptacle. DO NOT cut or remove the grounding prong from this plug.
Avoid re hazard or electrical shock. DO NOT use an adapter plug, an
extension cord, or remove grounding prong from electrical power cord. Failure
to follow this warning can cause serious injury, re or death.
WarNiNg
Severe shock, or damage to the cooktop may occur if the cooktop is not installed by a qualied installer or
electrician.
CautioN
Any additions, changes or conversions required in order for this appliance to satisfactorily meet the
application needs must be made by a qualied service technician in accordance with the manufacturer’s
instructions and all codes and requirements of the authority having jurisdiction. Failure to follow the
instructions could result in serious injury or property damage. The qualied agency performing this work
assumes responsibility for the conversion.
For personal safety, the cooktop must be properly grounded.
For maximum safety, the power cord must be plugged into an
electricaloutletthatiscorrectlypolarizedandproperlygrounded.
DONOT operate the cooktop using a 2-prong adapter or an
extension cord. If a 2-prong wall receptacle is the only available
outlet, it is the personal responsibility of the consumer to have
it replaced with a properly grounded 3-prong wall receptacle
installedbyaqualiedelectrician.
See the INSTALLATIONINSTRUCTIONS packaged with this
cooktop for complete installation and grounding instructions.
LIQUEFIED PETROLEUM (PROPANE) GAS CONVERSION
ThisappliancecanbeusedwithNaturalGasandPropaneGas.Itisshippedfromthe
factory for use with natural gas.
A kit for converting to LP gas is supplied with your cooktop. The kit is marked “FOR LP/
PROPANEGASCONVERSION”.Followtheinstallationinstructionswhichareinsidethe
envelope.
Theconversionmustbeperformedbyaqualiedservicetechnicianinaccordancewith
the kit instructions and all local codes and requirements. Failure to follow instructions could
resultinseriousinjuryorpropertydamage.Thequaliedagencyperformingthiswork
assumes responsibility for the conversion.
Comentarios a estos manuales