Electrolux EOB6851BAX Manual de usuario descargar pdf (Pagina 17)

The core temperature

sensor must stay in the meat

and in the socket during the

cooking.

1. Activate the appliance.

2. Put the tip of the core temperature

sensor into the centre of the meat.

3. Put the plug of the core temperature

sensor into the socket at the top of

the cavity.

The display shows the core temperature

sensor symbol.

4. Press or in less than 5

seconds to set the core temperature.

5. Set the heating function and, if

necessary, the oven temperature.

The appliance calculates an approximate

end time. The end time is different for the

different quantities of the food, the set

oven temperatures (minimum 120 °C)

and the operating modes. The appliance

calculates the end time in approximately

30 minutes.

6. To change the core temperature,

press

.

When the meat is at the set core

temperature, an acoustic signal sounds.

The appliance deactivates automatically.

7. Touch any symbol to stop the signal.

8. Remove the core temperature sensor

plug from the socket and remove the

meat from the oven.

WARNING!

The core temperature

sensor is hot. There is a risk

of burns. Be careful when

you remove the tip and the

plug of the core temperature

sensor.

9.2 Telescopic Runners

Keep the installation

instructions for the

telescopic runners for future

use.

With telescopic runners you can put in

and remove the shelves more easily.

CAUTION!

Do not clean the telescopic

runners in the dishwasher.

Do not lubricate the

telescopic runners.

1. Pull out the right and left hand

telescopic runners.

°C

2. Put the wire shelf on the telescopic

runners and carefully push them into

the appliance.

ENGLISH 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Comentarios a estos manuales

Sin comentarios