Electrolux EOB6851BAX Manual de usuario descargar pdf (Pagina 41)

When the cleaning is completed, install

the glass panels and the oven door. Do

the above steps in the opposite

sequence.

Make sure that you put the glass panels

(A, B and C) back in the correct

sequence. The first panel (A) has a

decorative frame. The screen-printing

zone must face the inner side of the

door. Make sure that after the installation

the surface of the glass panel frame (A)

on the screen-printing zones is not rough

when you touch it.

A B C

Make sure that you install the middle

panel of glass in the seats correctly.

12.7 Replacing the lamp

Put a cloth on the bottom of the interior

of the appliance. It prevents damage to

the lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

CAUTION!

Always hold the halogen

lamp with a cloth to prevent

grease residue from burning

on the lamp.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300

°C heat-resistant lamp.

4. Install the glass cover.

13. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

ENGLISH 41

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Comentarios a estos manuales

Sin comentarios