
4 Electrolux 818 14 51--01/7
Using the fridge
GB
To start the fridge and thermostat
control
Turn the t hermostat control to the desired position.
MIN The lowest position of the thermostat control
results in the highest temperature inside the cabinet.
MAX The highest position of the thermostat control
results in the lowest temperature inside the cabinet.
H : Switched off.
Switching off
Turn the control anti-clockwise past the click
position to "H".
Unplug the power supply plug from the wall socket
or, alternatively, remove the fuse.
Temperature inside the fridge
A suitable temperature inside the fridge is approx.
5°C. If the thermostat control is set too cold, food
with a high water content may start to freeze if it has
been placed in the coldest places in the fridge. The
picture shows the coldest and warmest places inside
the fridge.
(+ warm, - cold)
Meat, fish and milk should be put in the coldest part
of the cabinet.
The temperature will be affected by:
· How often the door is opened
· How much food is stored
· Position of the appliance (See chapter
Installation)
Measuring the temperature
If the temperature is measured using a standard,
single thermometer, t his should be put in a glass of
water centrally placed inside the cabinet. This will
refl ect the temperature inside the food products. Do
not place the thermometer hanging or lying directly
on the shelf.
· Distribute foodstuffs to allow cold air to
circulate freely between the products.
· Do not place food products directly against the
cooling plate on the rear wall since t hey may
freeze in this case.
· Also never put warm products into the cabinet .
Wait until they have cooled down.
· Cover all foods properly to avoid odours and
flavours from tainting other food.
+
+
+
+
--
--
--
--
+
+
+
+
Comentarios a estos manuales