Electrolux EKG64100OX Manual de usuario descargar pdf (Pagina 25)

– You can easily examine it in order to

check its condition.

To preserve the flexible pipe, you must

regularly check if:

– It does not show cracks, cuts or burn

marks on the two ends and its length.

– The material is correctly elastic and not

hardened.

– The fastening clamps are not rusted.

– It is not expired.

If you can see one or more defects, do

not repair the pipe, but replace it.

After installation is complete, use

a soapy solution and never a

flame to see if you sealed all the

pipe fittings perfectly.

The gas supply ramp is on the rear side of

the control panel.

WARNING!

Before gas connection discon-

nect the mains plug from the

mains socket or switch off the

fuse in the fuse box. Close the

primary valve of the gas sup-

ply.

ABC

DE

A)

Gas connection point (only one point

is applicable for appliance)

B)

Gasket

C)

Adjustable connection

D)

Natural Gas pipe holder

E)

LPG pipe holder

The appliance is set to default

gas, to change the setting choose

pipe holder from the list. Always

use the gasket sealing

13.5 Adjustment to different

types of gas

WARNING!

Let only an authorized person do

the adjustment to different types

of gas.

This appliance is for operation

with liquid gas.

With the correct injectors, you can

also operate it with natural gas.

WARNING!

Before replacing the injectors,

make sure that the gas knobs are

in the Off position and disconnect

the appliance from the electrical

supply. Let the appliance cool off

fully. There is a risk of injury.

13.6 Injectors replacement

1.

Remove the pan supports.

2.

Remove the caps and crowns of the

burner.

3.

With a socket spanner 7 remove the

injectors and replace them with the

ones which are necessary for the type

of gas you use.

4.

Assemble the parts, follow the same

procedure backwards.

5.

Replace the rating plate (it is near the

gas supply pipe) with the one for the

new type of gas supply. You can find

this plate in the package supplied

with the appliance.

If the supply gas pressure is changeable

or different from the necessary pressure,

you must fit an applicable pressure ad-

juster on the gas supply pipe.

13.7 Adjustment of minimum

level

To adjust the minimum level of the burn-

ers:

1.

Light the burner.

2.

Turn the knob on the minimum posi-

tion.

3.

Remove the knob.

4.

With a thin screwdriver, adjust the by-

pass screw position (A). The bypass

screw position (A) depends on model.

ENGLISH 25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios